ALBAMAT 600 V5

  • Albamat 600 V 5 01

  • Albamat 600 V 5 02

  • Albamat 600 V 5 Perforator

Features ALBAMAT 600 V5

  • 60 t pressing force
  • Suitable for pressing: paper, cardboard, printing waste, foil, hard and soft plastics (PET, HDPE etc), fleece
  • Low energy consumption due to advantageously crossed press cylinder arrangement (2 press cylinders)
  • 5-fold automatic vertical tying
  • Vertical stamp, Tank and control cabinet heating and oil-cooler as standard equipment
  • Ground slide and piston valve for covering the needle opening (prevents contamination of the binding unit with plastic or other small particles, etc.)
  • Channel adjustment - 3 sides, hydraulic-automatic, 4 working cylinder
  • 4 retaining clamps to retain expanding material in the press channel
  • Photocell control in the filling chute
  • Continuous feeding by conveyor belt etc.
  • Fast cycle times
  • Additional photocell for overfilling
  • Mobile, hook lift according to DIN
  • Pivoting tying unit for transport and service
  • Simple and safe operation via 5.7" touch panel and push button function
  • 10 programs for different materials (paper, foil, plastic, user recipes etc.)
  • Operator side freely selectable
  • Hopper as required

    Technical data ALBAMAT 600 V5

    TYPE 600 V5
    Pressing force: [kN/t] 600/60
    Specific pressing force: [N/cm²] 78
    Motor: [kW] 22 30 45
    Throughput weight cardboard 35 kg/m³ (B19): approx. [t/h] 3,3 4,2 5,4
    Volume-idle running: [m³/h] 158 198 260
    Volume-under working conditions B19: [m³/h] 95 120 156
    Cycle time: [sec] 25 20 15
    Feed opening: WxL: [mm] 1.140 x 1.370
    Weight: approx. [kg] 9.000
    Tying system: Vertical, 5-fold, automatic
    Bale size W x H x L: [mm] 1.050 x 720 x 1.200
    Bale weight– cardboard B19
    (depending on type of material): [kg]    		 approx. 450-500
    Overview of the technical data of all series
    Accessories and Extras

    We are happy to advise you

    We would be delighted to advise you on a press which you may be considering. On request, you will receive additional product information with all the technical data and a non-binding offer.

    Mr. Uwe Albers will be happy to answer any questions you may have.

     

    abba PRESSENTECHNIK

    Luddenfehn 15
    D-49779 Niederlangen

    Phone (+49) 0 59 33 / 92 53 5
    Fax (+49) 0 59 33 / 92 53 6
    E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.